Need some help. I have oil bath hubs on my extreme trailer. One is leaking. How do i fix it? Any help is appreciated.
|
There are inner and outer seals just like a grease lubed hub. One must have gone bad. You can download the repair instructions from <a href="http://www.ufpnet.com/PDF/TBGAxleMaint.PDF" target="_blank">http://www.ufpnet.com/PDF/TBGAxleMaint.PDF</a>
|
Just curious, how are you getting the cap with the see through window on th eend of it fro checkign the oil level, off?
|
Which kind of oil bath bearings do you have? If the cap is aluminum with a window (as on my '03 MC trailer), you bang it off. I have seen at least one kind of all-plastic cap which is threaded and can be twisted off. <BR> <BR>(Message edited by fbroen on July 10, 2006)
|
I used a rubber mallet last time I had to get it off, just wondering if that was normal.
|
Thanks everyone. Very helpful info. George, i appreciate the download. Thanks
|
Why do you take the cap off? Wouldn't that let all the oil flow out?
|
You don't, other than for repairs such as if a seal has gone bad and you need to change it. <BR> <BR>And yes, the oil flows out if you take it off.
|
All times are GMT -7. The time now is 6:28 PM. |