I want to mount some speakers on my skylon fat pole (3" dia). Any suggestions on mounting brackets/configuration?

You can fabricate one. My neighbor did and I will send you some pics in a week or so when I get some. Also I just made a set for a friend. There was a skylon mount on here ini the classified ads and I just bloted some cans to the mount and that was that. Try contacting skylon becasue they made the bracket that I bought off the guy on WW

you can find everything you need at home depot. I used 1 7/8 inch galvinzed pipe paintied black and some large u-bolts painted black. I clamped the cans to the pipe. I had to use a rubber pipe connector (3 inch) to stop the u-bolt from sliding down the pole in rough water

i mades some cans out of a 6" pvc coupler <BR>then i bought some 8' L brackets , i mounted a L bracket on each side of the pylon ,i drilled a hole threw the pylon then i mounted the speakers on the bracket <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/227198.jpg" alt="pylon">

I've got a set of quick disconnect wake tubbies (6-1/2") with the bracket for a extended pole I no longer use. Here is a pic of the pole &amp; bracket, if you're interested I can get a pic of the speakers this weekend. <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/227242.jpg" alt="speaker bracket on pole">

Gordon, Do you still have the board rack, and if so do you want to sell it?

Gordon, do you still have the speaker mounts and rack? Would really like to buy!

<a href="http://www.wakeworld.com/MB/Discus/messages/65921/195989.jpg" target="_blank">http://www.wakeworld.com/MB/Discus/messages/65921/195989.jpg</a>

882001 - do you know how I can get a hold of those speaker racks? Are they for sale? CAll me @ 805-886-8318 with any info if you don't mind.

i got tower speakers and had that size pipe welded to the pole. it was the cheapest route

did you go with aluminum, or what kind of pipe is that?