Installed a new deck.....The old deck was a sony 35x4 the new deck is Kenwood....50x4...The problem is anytime it pulls too much power..or I trim the outdrive it shuts down...started doing this while the boat was off and by turning the volume up past 24....any suggestions or ideas...please help
|
Um ok. But what is up with the title of this thread? <BR> <BR>Check your connections. Does the power wire have a good connection. Try running a direct line to the battery. If the power wire is attached to the same power wire to the outdrive then it could be draining the power.
|
All times are GMT -7. The time now is 10:16 AM. |