Board threads messed up.
 

Heya,

It looks like one of my binding screws was a bit loose and messed up the top 2 threads in my board. Can I just tap it out? If so, anyone have any idea what size of tap I would need? It's a CWB Transcend.

Thanks!

Go to a hardware store and match up the binding screw with one there. That will tell you the size and thread/inch. Harbor Freight is the cheapest place to find a tap.

My LF Shanes use 1/4 x 20 NC x 1 Truss Head Machine Screws, and they fit a HL board.

It was a 1/4x20 thread. Thanks!