Just ordered a 2012 RZR
After a year and a half of debating what boat to get, I finally placed an order Thursday for a 2012 Tige RZR. We actually planned on ordering a boat around this time last year but between my work schedule, travel and our 2 small boys the summer was over before we knew it!
The good thing is that we were able to ride in and behind a couple different boats and were able to see all the new boats at the Houston Boat Show for 2 years. From the beginning I was drawn to Tige as it was the first boat I ever wake boarded behind back in college in the late 90's. I know over the last 1.5 years I've drove Steve and Brandon at Texas Tige crazy with my indecisiveness but they were always very accommodating. Steve and Texas Tige are probably one of the biggest reasons I chose Tige. Their commitment to the brand and customer are 2nd to none and their service manager is probably the foremost PCM authority in the industry. In fact, he wrote or co wrote the actual PCM service manual. Although I had already made my decision and put down a deposit at the boat show on Sunday, it also didn't hurt that in back to back test drives today the RZR easily outperformed a 2012 X2. The wakeboard wake on the RZR was bigger and rampier and the surf wake was so much better it was actually almost laughable. The RZR is much better looking, the Alpha Z tower was sturdier and the boat handled and cornered better than the X2. The hardest part of the whole process really was deciding what color combo to go with. I really wanted an all graphite boat but after seeing it in person, the graphite just wasn't dark enough, although I really liked it in metallic pearl. We played around with some Electric Blue accents, white accents, black, etc but nothing ever really stood out until we visited the boat show this past weekend. |
I just couldn't stop looking at this boat that Texas Tige had in their booth:
http://i295.photobucket.com/albums/m.../WhiteRZ22.jpg http://i295.photobucket.com/albums/m.../WhiteRZ23.jpg http://i295.photobucket.com/albums/m.../WhiteRZ21.jpg So we finally decided to order the RZR exactly like the RZ2 at Texas Tige with the following colors and options: Entire boat and tower in Frost Entire interior and dash in Mercury (the textured grey accent material) with black stitching and piping (completely custom) Light grey bimini Surf ballast Carlotta steering wheel Tower of power stereo with white Rev10's and transom remote Dual batteries SS rubrail Salt water steering (we will mostly be on the San Bernard River which is brackish) Salt water flush kit Fresh water strainer Zinc anode Boat cover Clamping board racks (way too expensive but very cool and a must!) http://i295.photobucket.com/albums/m...8/WhiteRZR.jpg |
Congratulations on your new Tige! I'm sure you wlll enjoy it.You should tour the factory in Abilene Texas. It's right across the street from the airport and it will really help you see the Quality that goes into these boats.Happy Boating.
|
Very nice
|
I have to vouch for Steve also. I met him at the boat show and he's followed up with me a couple of times. He spent 30 minutes with me on the phone last week not only talking about the used boats he had for sale, but helping me with the local lakes, storage information, and overall boating experience in our area.
Oh yeah, they have a 2008 22Ve that is really nice... James |
Quote:
|
TJ love the all white sweat boat. You will really be glad you got the all white when you start cleaning it. I wish I had gone all white with the tan interior just for clean up.
|
Originally I was going to do a tandem axle Boatmate trailer custom painted in Sterling Grey to match my Platinum F150 Ecoboost (which I can't wait to tow with). Even though I don't like the look, I am strongly considering an aluminum trailer for the durability in the brackish water.
The water this past year was REALLY salty. A couple friends on the river who previously had painted steel trailers opted for aluminum trailers and are really happy they did. I did some research on aluminum trailers and decided I just couldn't live with an I Beam version unless that's absolutely all I could get. I found a couple high end builders (Pacific and Myco) who build custom C-Channel framed, aluminum trailers. Pacific won't deliver and Myco will only do 30' boats and above because of cost. I called McClain Trailers here in Houston and talked to them about it. They called manufacturing and said they could actually do a C-Channel frame Aluminum trailer and custom build it for my RZR! This style looks much more like a traditional steel trailer and since everything is welded as opposed to being bolted on, they can build it so that the boat sits much lower on the trailer than an I Beam version. This is key for getting it to fit in the garage. I found a couple pics of a C-Channel aluminum trailer they did and I think it looks great, minus the diamond plate. Because they build it custom and really take into consideration the placement and balance of the boat on the trailer, they were able to lower the tongue weight from 1110lbs to 750lbs on this particular trailer over his previous I Beam trailer. I had them price it with the Fulton F2 jack, Fulton wench, all LED lighting, all stainless screws, bolts and hardware, aluminum wheels, surge brakes and swing away tongue. http://i295.photobucket.com/albums/m...8/edbba3c4.jpg http://i295.photobucket.com/albums/m...8/c1495a32.jpg http://i295.photobucket.com/albums/m...8/e449604f.jpg http://i295.photobucket.com/albums/m...8/f6957428.jpg http://i295.photobucket.com/albums/m...8/ce7f1012.jpg http://i295.photobucket.com/albums/m...8/f6957428.jpg |
Quote:
|
That is a VERY good looking boat. I'm all for the "ghost" look. Looks especially good with Tige's white tower and white WetSounds.
|
Congrats on the sweet ride! Can't wait to get my new boat. Probably going to be 2-3 years though.
|
I really like what TIGE is doing these days! That is a beautiful boat!
|
Wow, that's a good looking boat. I don't know why all-white looks so good, but it never seems to disappoint. Soooo clean! It's making me wonder if I chose the right colors for my Z3! :)
|
Your Boat is going to be beautiful! Love the all white!
|
Congratulations on your Tige', I really like your color scheme, once you go white you never go back! Hope you have some great times on the water this season! Enjoy... post up some pics when you take delivery, that will be a great day for you!
|
Very nice and classy.
|
What is the price difference between the RZR and RZ2?
|
About 7k to 10k depending on options you select.
|
Tige sent a couple pics of my boat this morning. Being all white, it looks kinda plain now but I think it will look great once it's finished. I can't wait to see the interior!
http://i295.photobucket.com/albums/m...8/0e423ea6.jpg |
|
Looking good so far! We finally got a dealer near me that has Tige. Hoping to get over and check them out later this week but they look awesome!
|
|
So fresh, so clean. Nice job!
|
I stopped by McClain Trailers today. They are a day or two from being done with my trailer. It was hard to get many good pics but I think it looks really good. The steps and fenders will be diamond plate which I'm not real thrilled about but smooth stainless would have been crazy expensive. They bolt on so I'm thinking about taking them off at some point and having them sprayed with bed liner. A light grey would look good.
http://i295.photobucket.com/albums/m...8/d71b1892.jpg http://i295.photobucket.com/albums/m...8/8846e9fe.jpg http://i295.photobucket.com/albums/m...8/b430ba94.jpg http://i295.photobucket.com/albums/m...8/ad5f1a5c.jpg http://i295.photobucket.com/albums/m...8/3a32b489.jpg http://i295.photobucket.com/albums/m...8/633790fa.jpg http://i295.photobucket.com/albums/m...8/907bc2c5.jpg http://i295.photobucket.com/albums/m...8/e83da35e.jpg http://i295.photobucket.com/albums/m...8/3f690eb2.jpg |
Hey TJ, if you don't mind me asking, what did the trailer end up costing you? I'm in the Houston area and need to get a new trailer for my Sanger and been leaning towards going aluminum also but don't like the I-beam look either. That C-channel trailer looks really good. Feel free to PM if you don't want to post the price on the forum. I also wouldn't mind taking a look at the finished trailer in person.
|
Quote:
I talked to one of the guys at McClain today and mentioned that maybe once it is done, Texas Tige might be able to sell more of them...He didn't get too excited. He said he really didn't enjoy doing them because no matter what they are still completely custom and he basically has to have 1 welder/fabricator on it from start to finish, instead of moving it down an assembly line. |
And you are definitely welcome to look at it when it's done. It will probably be at Texas Tige for a couple more weeks, until my boat is done.
|
Thanks for the response TJ. I'll try to swing by Texas Tige and check it out.
|
TJ I live on Lake Conroe and drive by Texas Tige daily, look forward to seeing the new beauty out front soon, hopefully I will see it out on the lake or river
this spring too! |
I stopped by again today. Looks like they are almost done. It looks like it sits a lot higher than a Boatmate trailer but I measured and it was only about 3" taller (87" from the ground to the top of the windshield) than the RZR at Texas Tige on a Boatmate tandem trailer with 18" wheels.
http://i295.photobucket.com/albums/m...8/5bb1b4fb.jpg http://i295.photobucket.com/albums/m...8/c50147e1.jpg http://i295.photobucket.com/albums/m...8/5d05da9b.jpg http://i295.photobucket.com/albums/m...8/a8fa8bbf.jpg http://i295.photobucket.com/albums/m...8/52432fe1.jpg They are cutting off those makeshift eyelets and are going to weld a piece of boxed aluminum there for me to bolt a racheting strap. http://i295.photobucket.com/albums/m...8/fd28ae3e.jpg I expected them to use boxed tubing for the bunk supports but I guess they know what they are doing. That aluminum is pretty thick. My brother is going to make me some new stainless steps and fenders for me. I wish the underside of the bunks were carpeted or at least painted. Since they sit a little higher you can see the underside. That won't be hard to do later on if it bothers me. |
I moved some pics around in Photobucket by mistake and broke the links to the pictures above. Oh well, I should have some better pics soon.
I got a couple more pics today. The clamping board racks are installed now. Just about everything else looks done. They're just waiting on the vinyl we ordered to come in to do the interior. http://i295.photobucket.com/albums/m...8/2649b844.jpg http://i295.photobucket.com/albums/m...8/b7cc169a.jpg http://i295.photobucket.com/albums/m...8/d6e38801.jpg I picked up a new Ronix One Time Bomb today at M2 Sports in Houston. Can't wait to get it out on the water! http://i295.photobucket.com/albums/m...8/23cbdf66.jpg http://i295.photobucket.com/albums/m...8/9fad0d5c.jpg http://i295.photobucket.com/albums/m...8/b5147013.jpg http://i295.photobucket.com/albums/m...8/1454eec2.jpg http://i295.photobucket.com/albums/m...8/d0ce0985.jpg Hopefully they will get the boots in soon. I think they're pretty sweet. http://i295.photobucket.com/albums/m...8/81d6d993.jpg |
Jean sent a few more pics today! Tige's customer service is awesome!
http://i295.photobucket.com/albums/m...8/71a921f8.jpg http://i295.photobucket.com/albums/m...8/ca68df77.jpg http://i295.photobucket.com/albums/m...8/dd7bd6bd.jpg |
I'm glad people out there still like the Ghost look going all white...
|
Quote:
|
Clamping board racks FTW!
|
Quote:
|
Quote:
I nearly fell out of the chair when Steve told me the price! The boat show pick 3 certainly made it easier since I only had to pay for the upgrade. I figured I better get them now, thinking that Mastercraft might try to throw a fit that they are infringing on their patent. I wonder what they did to make sure it was different enough? |
i know a guy who ran the ran bernard. taft leisner. black moomba mobius lsv
|
Jean just sent these pics of my boat. We did a custom grey vinyl in place of the Chrome vinyl Tige normally does and did Mercury as the accent color and also where the Mercury would normally go. We also did ALL of the stitching in black. I think it looks really nice and clean.
They did the water test on it already. It looks like the graphics should be on by Wednesday. Getting really close! http://i295.photobucket.com/albums/m...8/a36e98ef.jpg http://i295.photobucket.com/albums/m...8/1dfd91e7.jpg http://i295.photobucket.com/albums/m...8/8e398ba9.jpg http://i295.photobucket.com/albums/m...8/d3036cc0.jpg http://i295.photobucket.com/albums/m...8/9760ad43.jpg http://i295.photobucket.com/albums/m...8/6ec9fa1b.jpg http://i295.photobucket.com/albums/m...8/16af65c6.jpg http://i295.photobucket.com/albums/m...8/5bbcb0c7.jpg |
It looks like there's just a few more details left and it will be ready to go!
http://i295.photobucket.com/albums/m...8/6797709e.jpg http://i295.photobucket.com/albums/m...8/90931d41.jpg http://i295.photobucket.com/albums/m...8/3b360dc7.jpg http://i295.photobucket.com/albums/m...8/8cfa0316.jpg http://i295.photobucket.com/albums/m...8/ef92fc4a.jpg http://i295.photobucket.com/albums/m...8/57590fee.jpg |
Steve just sent me these pics of my boat loaded up at the factory, getting ready to make the trek back to Texas Tige!
http://i295.photobucket.com/albums/m...8/d148b669.jpg http://i295.photobucket.com/albums/m...8/669560da.jpg |
Absolutely love the all white nice job!!
|
Can't get enough of this White! Great build!
|
All times are GMT -7. The time now is 12:14 AM. |