I want to add a dual sealed 10 inch sub box in the boat. Do I need to have it custom made out of marine plywood, or is a pre made one that is made out MDF ok. It will reside under the observers seat in an 07 X2.
|
You can buy a prefabed one but I would recommend a custom one based on the exact specs of the subs you are using. Either way, having it Line-X'ed or such will ensure it lasts forever in the wet environment.
|
Matt make your enclosure out of mdf like normal then go to home depot and get epoxy resin for fiberglass mix it up and brush it on. Put a few coats on then sand smooth for paint or put carpet over that. I did this three seasons ago and it is still showing no signs of wear <BR>Dave
|
jug of epoxy costs about 20 bucks
|
Got mine line-x'd for $50.
|
Didn't know it was that cheap I'll look into linex next time
|
Ya I got three boxes done 1.25 cu ft each for $150.
|
All times are GMT -7. The time now is 7:15 AM. |