Bindings won't fit on Slingshot!?
 

I tried to mount up my 2010 Ronix Ones to my buddy's Slingshot Response. I tired every hole with and without the Ronix supplied adapters. Nothing worked. Any tips?

Pictures:

What's the spacing on the board?

Those boots are 6"

http://www.fuzeqna.com/evogear/consu...h=and&start=21

yeah didnt they change the industry from 8 inch to 6 inch hole pattern...I think thats ure problem

I figured it out, it needs two of those spacers on each binding. That lines the holes up perfectly. Thanks!

Oh haha, I figured you knew that. Simple mistake, time to go shred! :)

i think you could go SUP'R GANGSTA STANCE if you used the outer single holes and then one of the holes from the 4 hole section HAHAHA

but glad you got it dialed. 2008 the boards have 8inch standard mounting and 09 and newer is 6 inch

Jeremy, I thought about that but those holes wouldn't quite line up either.

Now I cant find 2 of my Ronix spacers! Guess I will have to get a couple more before I can shread this thing with my boots.

Dont they only come with 2 not 4?

I have a pair of 09' Ronix boots on the way (not concerned cuz I have a 6" board)...

I thought they came with 4, but I'll let you know.

My '10 Relix only came with 2

My 09 Ones came with 2 but my '10 Ones came with none : ( I got two more spacers from Wiley's at the recommendation of Ryan at Ronix. They were $20 and they shipped them out fast. Wiley's number is 206.762.1300 if anyone else needs some.

Ah-ha! I just returned some 2010 Ronix Cell's for this EXACT reason. I have an '08 Slingshot Recoil and couldn't mount them.

The sales dude at Tommy's Slalom Shop offered me 4 of those adapter spacer things, but I don't want to mount $400 bindings with some spacers. For that price, I'll find something that works perfectly.

Had the same thing happen with my LF boots. Slingshot spaces their inserts every .75 inch instead of every inch like a lot of other companies. So you have to have 8" base-plates for it to work.