WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Glove box shock removal? (http://www.wakeworld.com/forum/showthread.php?t=798253)

john211 05-23-2013 8:58 AM

Glove box shock removal?
How do I pop off the old ones? Just force?, or is there a trick or tool?
It seems like, with force alone, I'm going to tear the bracket out of the plastic wall.


tyler97217 05-23-2013 9:23 AM

You can usually stick a flat head screw driver in around the ball joint and push the clip down and it will slide out earlier. Look at the pic on the link. If you look close you can see the little metal clip inside the opening. Push it down a bit and it releases the tension around the ball.

migs 05-23-2013 9:33 AM

lift up the thin metal flap on the top of the ball ends with a knife/flat head screwdriver.

xstarrider 05-23-2013 10:29 PM

If u look at that metal ring there it a small cutout/slot for a flathead or knife to get in there and pop that ring outwards away from the shock body. And viola

All times are GMT -7. The time now is 8:40 AM.