Good board, heavier, soft edge helps, decent pop. But i got a shot of water in my eye through the Byerly Lock holes. <BR> <BR>Has any one plugged the Byerly Lock holes on their Catalyst? If so, how?

Here's how to fill them so that you could put the lock on in the future if you want to. Cover the holes on one side with some tape. On the other side drip some candle wax into the holes and smooth out the top when it dries. I've done this after removing fins from wakeboards and it works great.

hahaha, got a nice lil money-shot from the holes? sorry, just had to say it

i have the same board and the same thing happens to me <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/sad.gif" ALT=":-(" BORDER=0>

Listen to the candlewax guy, it works . I did it on my Byerly