Tracking fins
 

Ok guys I was looking under the boat the other day and noticed that the 3rd tracking fin (the back one) is slightly bent. I can try and get a picture later when I pull it out of storage.

the boat has always seemed to pull real hard one direction when on plane, and can turn around to the right significantly tighter than to the left. Is this because of the bent fin?

How hard is it to replace? I no longer have a quality tige dealership in my area

Its a 2002 Tige 20V

I would replace it, you'll never get it back to straight. It should be 4 bolts and some caulk. Getting to the nuts on the inside might be a problem though.

4 bolts and some 5200. Not your typical caulk.