I just lost privlage of using my friends boat lift due to him getting another boat. I was wondering how hard it would be to build one? Has anyone done this?
|
That would not be something that I would experiment with. Not only having to deal with damaging your boat but someone could get hurt real easy. I would buy one or find a used one the lake where you go.
|
The design is simple and does not look that hard. I have the assembly manual and could go of that. I guess if I cannot afford a lift what are your guys thought on mooring whips? I dont want to keep boat in water but I will if i have to. I am in between tow vehicles right now and am waiting till after I get marries this fall to buy another.
|
Look to craigslist and buy one in good condition used. I picked up a two motor, 6,000lb lift in very good condition for $700. There are good deals out there, you just have to be patient and then JUMP on it when it appears.
|
Sippo, I use mooring whips at my dock for friends that stop by, they work great.
|
If your talking about building a scissor style lift (like Nyman or Sunstream), then I agree with the others. Pick up a used one rather than attempting to make one. <BR> <BR>If your talking about a hanging style lift inside a boat house though....... There are kits available for making these lifts. Assembly is based on the design of the boat house your installing it in. And I believe their typically a lot less espensive.... but you have to have the boat house too.
|
I guess i am looking at using mooring whips this season. I really hate the thought of having it sit in the water all season. I have a buddy that is a fabricator and he is looking into making one so if we attempt i will show progress.
|
Whats up Adam? Heard you did a little power washing Sunday...
|
^^^The puke etched my neighbors concrete. I'm hoping it comes out with some cleaner, luckily my neighbor wasn't made at all...his response "s*it happens"
|
hey I'm an artist now, what can i say? <BR> <BR>yes mooring whips are cheap (relatively speaking) and work well. used free standing lifts are also an idea. Call my dad (<a href="http://www.tigerdocks.com" target="_blank">www.tigerdocks.com</a>). he has an inventory of used lifts and may be able to give you some recommendations. he also sells mooring whips if you go that route. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/577009.jpg" alt="Upload">
|
i just took apart and re-assembled my Hewitt cantelever lift. if you have a bandsaw, drill press, and can weld aluminum you could easily make your own. but, i think the cost of the materials and winch and pulley's and cables would probably be about the same as a used lift...but the design is really simple...
|
Wow, I guess Ill remember that a Captain Morgan and Jagerbomb mix with stomach acid can eat concrete. <BR>Does your Dad need a Florida rep? My job is starting to bore me... <BR>A used lift is the way to go unless you just like to build stuff - I totally understand.
|
ANDREW....thanks for the link to tigerdocks.com <BR> <BR>All i can say is that if i had that link a few months ago i would probably have saved a ton of money. A lot of used lifts on there. and most are located in STL, only a couple hour drive... <BR> <BR>I ended up going with an Econolift floating front-mount(local dealer). I'm not thrilled about how it's working out...
|
Yeah they really become a full service waterfront company over the last 10 years. Best thing is he will help you out with advice, even if you don't buy stuff from him. I think a lot of people from wakeworld have talked to him. <BR> <BR>I designed the site currently up YEARS ago, and their new site is literally days away from being posted. We spent a ton of time on it. I'll post a notice as soon as it goes live. Should have online ordering functionality now too, and tons of new pictures.....
|
couldn't help a sneak peak...... <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/577611.jpg" alt="Upload">
|
ted - we can talk about it this weekend....
|
^^^^round 2...I'm off thursday, friday, sat, sun, and maybe monday. Highs int eh 90's and sunny.
|
Here is a lift company that will send you a lift un-assembled which can save you $s when you assemble / install yourself. Lots of options and prices. <BR> <BR><a href="http://www.hewitt-roll-a-dock.com/lifts07/index.html" target="_blank">http://www.hewitt-roll-a-dock.com/lifts07/index.html</a>
|
Sounds good to me. Ill put my board back in truck today and Ill be ready ready for thursday, friday, saturday and sunday - and monday...
|
There are actually a number of different lift options you can install yourself. I think a fair amount of customers for new and used lifts end up doing the install themselves. Most of the freestanding ones (hewitt, sunstream, shoremaster, etc) are not too tough. Its the integrated ones that are a little more challenging.
|
All times are GMT -7. The time now is 4:00 AM. |