WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   DIY T handle (http://www.wakeworld.com/forum/showthread.php?t=777766)

flydenrict 03-21-2010 6:06 PM

DIY T handle
 
Im trying to make my own T handle by adding a little wooden dowel for the T. Im wondering if somebody could measure their t handle and tell me how far from the handle to place it. If you could measure from where the two handle ropes join to the T, that'd be sick. or measure from the actual handle bar itself. Im guessing that based on the measurements it will be real obvious as to where you took the measurement. Thanks

mc_x15 03-22-2010 8:44 AM

I made one just like that a while back. All i did was wrap the handle around your body and put the T where it feels comfortable. Works great for me even though i wreck everytime i try a wrapped trick. lol

04-05-2010 4:11 PM

I did that with one of my Accurate handles and I removed the tube covering the 5' of rope to the handle to place the T. It worked fine until after a set it got really tangled up and took about 30 min to untangle. If you are going to make one, I suggest taking off the tube, cut it where you want the T to be, then put the bottom half of the tube on, then wrap the T on, then trim the second piece of the tube and slide it on.


All times are GMT -7. The time now is 4:56 PM.