Where should I mount underwater LEDs? I wanted to put them to the outside of the exhaust, but that area is not accessible from the engine compartment. They are the bulletlines X6000s. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/699881.jpg" alt="Upload">
|
Hey Joe put them in between the exhaust ports. There is easy access to that location in the bilge.
|
Bruce, can you email me a picture of the location on the current model year boats? <BR> <BR>thanks
|
<img src="http://www.wakeworld.com/MB/Discus/messages/65921/699955.jpg" alt="Upload">
|
What do you guy's use to seal the hole's for the wire's? silicone or 3m 5200?
|
Matt beat me to it.
|
5200!!!!!!!
|
Use the 5200 fast cure. Slow cure is super runny and messy. Wipe the excess off with rubbing alcohol.
|
All times are GMT -7. The time now is 11:00 AM. |