Ronix bindings on a liquid force board
 

Hello All,

I just bought my first board ( 2013 LF Bob grind ) and would like to compliment it with 2013 Ronix one binding. Are they compatible? Do i need to buy anything extra to fit them?

The reason im asking is it states on the board that the B.O.B board reuire the use of the m6 metric system.

Another question, If im a siz 10-11 on LF qill i be a size 10 or 11 on Ronix. Since i live in Abu Dhabi, i dont have the luxury to try them out since they are not available here.

They are compatible. I ride a watson hybrid with ronix ones and they bolt on fine. Not sure on the sizing

I have the Shane with Ronix Ones, you're good to go!

Ronix one bindings with 2011 LF harley! My favorite set up ever.
And it matches my boat!http://img.tapatalk.com/d/13/07/11/yja8ezep.jpg

Sweet! gona order mine right now

I'm not sure about the 2013 Ones, but I know the 2012 Ones were still shipping with just English bolts. So unless they've changed that in 2013, you will need to buy some metric m6 bolts at the hardware store (and maybe some washers).

2013 Ronix Boots will come with both 1/20 Bolts (US) as well as M6 Metric Bolts, (The Black ones) Make sure you use the black ones to attach them to your board.
They will mount up just fine! Enjoy the new setup!