who has placed new amps in there x2/xstar. I have 2 ppi pcx 4125's that need to go in but all the areas in the storage compartment are uneven surfaces so boards to mount the amps to wont lay flat against them. any pics/ideas of what i can do will help. Im gonna be working on this tomorrow. These amps are long.

This is what I did. I built a new amp board that has some room behind it <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/171567.jpg" alt=""> <BR> <BR>(Message edited by gizel on May 22, 2004)

ok yeah i built a new board because the surface like you mounted yours on was uneven. I was wondering if that would be a good place. I was almost gonna bondo up the wall to a flat surface then mount the board to that. That is where i wanted to place the amps. or i was thinking maybe even on the other side wall across from that one