WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 21, 2003 (http://www.wakeworld.com/forum/forumdisplay.php?f=68703)
-   -   02 or newer Nautique>anyone change the deck? (http://www.wakeworld.com/forum/showthread.php?t=65847)

wikd281 05-05-2003 6:38 PM

I am considering changing the factory Clarion stero out of my 02 super air> but am not sure what else will fit? Has anyone put a waterproof stereo cover in place of the Clarion unit? I would like to run a kenwood deck so that I can control the KEG> which is a hard drive> to play MP3's. Have you ever seen anyone that put in a double din setup where the factory location is(behind the drivers rigth elbow?) <BR>Thanks for any help!

aaron_bell 05-05-2003 7:35 PM

I would like to know how to remove the panel were the radio is. I have thought about a new system,but have placed it on the back burner not being sure of the removal. Anyone have any tips??

samcdog 05-05-2003 7:53 PM

In 03 the deck is in the glove box.

wikd281 05-06-2003 6:29 PM

Has anyone done this before? Anyone seen a radio splash guard that are made for boats that are double din like the clarion deck? <BR>Thanks!

h2o4me 05-07-2003 12:57 PM

Hey Harold, I have replaced my Clarion with an Eclipse deck. The face of the Clarion is Double din but the deck is just a single din. When you look from the back you will see. Any din deck will mount, you just need to make a face plate to cover the factory area. If you want to put a double din in it's place you should have room. Pull your deck (easy to do), and measure. Good luck, Eric

wikd281 05-07-2003 3:04 PM

Thanks for the reply! Did you use a waterproof cover? <BR>Any pics? <BR>Thanks!

domtatro 05-13-2003 11:39 AM

MY 02 air is currently in the audio shop. I am having them put in an alpine deck. They are using a cover over it they say they can make it look like a factory install. I get the boat back tomarrow and ill post some pictures.


All times are GMT -7. The time now is 12:04 AM.