Any one know the leg diameter on the the standard towers sampson has made for the last couple years?
|
from their site... you looking into getting one? <BR> <BR>"Every tower is fabricated from 2" diameter thick wall 6061 aircraft aluminum tubing and is TIG welded using square wave technology."
|
I believe on some of the 07' bigger boats they went with 3". My friend has a RZ2 and his tower is 3", also saw a 24V with a 3" tower.
|
They have more custom looking towers that are bigger diameter, but the standard aftermarket one that most people get is the 2" that they show on their website.
|
Thanks. I saw the 2" on the site but wasn't sure about the older towers.
|
Gary is lurking on this site. I'll shoot him an e-mail.
|
Ryan, our standard tubing is 2", however we also do 2.5" and 3" not only on custom towers but we can do the larger diameter on our standard tower. <BR> <BR>JP is correct in that we build towers for a lot of Tige dealers and the RZ tower is 3" That particular tower is called the switchblade. <BR> <BR>Another tower called the Razor (Used on Epic) is 2.5"
|
Thanks Gary just wanted to see if diameters had changed in the last 3 or 4 years on the traditional sampson tower.
|
All times are GMT -7. The time now is 10:26 AM. |