Ok, so i just got some 3DS bindings today and they are very very tight, no big suprise there. the point is i cant get my foot in either of the bindings. Does anyone know any particular ways the loosen them off a bit? i have some cups in there to stretch them at the moment. is there anything else i could do? <BR> <BR>thanks <BR>toby

all i know is ur gunna look wierd wearin em around <img src="http://www.wakeworld.com/MB/Discus/clipart/lol.gif" border=0>

call hyperlite up

Use lube................and RIDE! <img src="http://www.wakeworld.com/MB/Discus/clipart/wink.gif" border=0>

replace the cups with something larger that won't lose shape. let them sit overnite (Pilsner glasses come to mind). Once you can get your feet in there, let them soak in hot water so they form to your foot. then ride the snot out of 'em. should be close to broken in.

3ds boots a very stiff when you first get them, just use soap or something to get into them, and in about 5 sets the will stretch some and be more flexible as well!

I don't think glass is a good idea either. My wife's CWB boots were too narrow I used some 2x4's stacked in there for a week and she said it was all good. I have the boots you're having problems w/ and trust they get better maybe not THAT much better but they do. I had to use soap to get mine on when I first got em and in the heat and time they loosened up a lot.

soak em in hot water, and then put em on and off a couple times. its always worked for me!

Dont use soap. <BR>In the close toe it doesn't really wash out and makes your feet move around alot in the boot. (unless by soap they mean binding lube) then go for it. <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0>