Someone have pictures of this special edition 230 ??
|
my boat dealer have it in stock is it the real one that towed the 50th or they made another one ??
|
i thought they only made one of each, a 230 and a 196
|
yeah i got my answer if someone want to see the pictures here they are : <BR> <BR>http://www.flickr.com/photos/31045388@N06/sets/72157618107932125/ <BR> <BR>(Message edited by radikal on July 07, 2009) <BR> <BR>(Message edited by radikal on July 07, 2009)
|
<img src="http://www.wakeworld.com/MB/Discus/messages/65921/713643.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/713644.jpg" alt="Upload"> <BR> <BR> <BR>here they are
|
<img src="http://www.wakeworld.com/MB/Discus/messages/65921/713648.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/713649.jpg" alt="Upload"> <BR> <BR>2 other shots one slammed a bit and other one from the back view.
|
Not to hijack but I want to see a wake picture from that second shot. She sure is sitting low. Still experimenting with mine and wonder what speed you have to ride with that much weight to keep it clean. Just got the front bow sac, locker sac and two 750s for the rear. Can't wait to try different configurations.
|
Dave do you have problem to make a clean wake on a 230 ?
|
Nice!
|
That thing looks nasty slammed like that.
|
Not a problem, just experimenting still to find out what works best. <BR> <BR>Put enough weight in any boat and you have to speed up at some point to make it clean. When I had too much weight in the rear with not enough in the front, it looked like it wasn't clean from the boat... but when you cut in and hit it, it was. <BR> <BR>That boat looks like it has a crap load of weight and it would just be interesting to see how the weight was distributed and what speed/length it was being ridden.
|
BEst one i took of the wake<img src="http://www.wakeworld.com/MB/Discus/messages/65921/713759.jpg" alt="Upload">
|
This boat is just pretty sick, my hearth beat everytime i see it, this special edition boat i wish i could be that 1 of 1 piece owner of that beauty Correct Craft made. Even Old mustags had more than 250 pieces made :p
|
I run 75o's in the back and 1g in the nose. Looks like that. Wake is slamin at 23.5
|
How much does one of those cost?
|
dj, <BR> <BR>Just got my order of 2 750lb rear locker sacs and a 750lb bow sac. Plus I have a 400lb ski locker sac and 200lbs of lead so I should be able to try that exact combination shortly. Just have to fill them up manually until I have time to plumb it all in. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/713888.jpg" alt="Upload">
|
Martin the one you are seing there is a one of a kind boat only one made and goes for around 90-95k US
|
Wow. I am thinkin thats the nicest boat I have seen.
|
I'm not sure I like the tower, and I wonder how stable it is without any front support tubes.
|
I like the new tower style. It also a lot less expensive to make compared to the 2008 tower. If the quality is there and the functionality is there, then I dig it.
|
The new Tower is as solid as it gets not to mention its very functional.
|
Dave, <BR> <BR>you will not be dissapointed. I took my hard tanks out so I fill up the 750's. if your putting them on top of the tanks, you might not want to fill them all the way.
|
All times are GMT -7. The time now is 2:14 PM. |