So you might remember this thread a week ago <a href="http://www.wakeworld.com/MB/Discus/messages/3183/534757.html?1200550978" target="_blank">http://www.wakeworld.com/MB/Discus/messages/3183/534757.html?1200550978</a> <BR>I was in the market for new racks, and ran into a deal i could not refuse. I emailed Ken Land at <a href="mailto:kland@bulletlines.com">kland@bulletli nes.com</a>. After a few emails back and forth he convinced me that if i purchased his product i would not be disappointed, so i went ahead and ordered. TWO days later, yes...TWO, the racks were at my front door!! Well anyways,i was so excited to get them i ripped the package open and assembled them. The quality of these racks by far exceeds their price. They are a beautifully polished and shine like a mirror. I cannot wait to put them on my boat, but unfortunately im gonna have to wait until April. When i put them on my boat though, i will post pictures again!!! You will be able to tell by the pics the quality of the racks themselves as well as how well they hold the board, there is no metal:board contact, and the bungee holds the board in its place flawlessly. Hope you can tell what a great product Ken has by the pictures. Feel free to ask any questions here or PM me as well. <BR>You can check out these racks at <a href="http://www.bulletlines.com" target="_blank">www.bulletlines.com</a> or email Ken directly! ENJOY!! <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536676.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536677.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536678.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536679.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536680.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536681.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536682.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536683.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/536684.jpg" alt="Upload">

Hey Eder, do they mount at multiple angles? What size tubing do they fit?

Yes, they do mount at multiple angles, you just have to screw the clamp on at the angle in which you want it. Mine are 2.5". I know Ken has 2", 1.75" and such. You can email him directly or check it out at bulletlines.com. Im still in love with these racks!

Check these out for $119.00 shipped. Much cleaner and not so many holes in them. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537229.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537230.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537231.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537232.jpg" alt="Upload"> <BR> <BR>Raul Camacho <BR>Diywake <BR><a href="http://www.diywake.com" target="_blank">www.diywake.com</a>

All these look good exept why not make the grooves that the boards slip into the same length so the bottom board is held as tight as the top board...

That doesen't sound right. The outer edges of the two boards should match up evenly, not be offset is what I am trying to say...

Raul, do your racks for $119 mount at different angles?

Todd, <BR> <BR>The oval rack only mount on vertical or horizontal bars if you need different angles then you need this rack. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537844.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537845.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537846.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/537847.jpg" alt="Upload">

the fingers are all the same length, look at the bottom ones, they are recessed on the rack so when the racks sit it the upward angle on the tower the boards don't look offset! <BR> <BR>If that made any sense at all lol!

BTW, I know it's marketing, but the selling of other racks on a post appreciating bullet lines is a pretty low blow!! I fully back Ken at Bulletlines, he's an awesome guy, great to work with, and has a great product!!

Josh, <BR> <BR>I also think ken is a great guy and i am also sure that he is not afraid of some competition especially since he sold my product all last year. He got into this knowing i would be around to defend my reputation of being the lowest priced wakeboard tower and accessory distributor. <BR> <BR>Raul <BR>Diywake <BR><a href="http://www.diywake.com" target="_blank">www.diywake.com</a>

haha, then that's respectable! Just don't think this thread, appreciating the racks that Eder already bought is the proper place to do it!! I've heard great things about DIYwake, and believe all of them, but you don't post a Malibu in a Mastercraft apprec. thread and then say that these are cheaper get these! <BR> <BR>Don't mean to be a hater, just sayin there is a time and a place for everything!

Thanks Josh, Couldnt have said it better myself!

I have to say though the bullet lines racks do a look a little "unfinished" when compared to DIYwake.