Just finished up my latest project on the boat. I made a sub box for the area between the driver's seat and the rear seat of my 03' SAN. Doubled my cup holder capacity and I now have wrap around seating like the older SA's. Took a bit of work but, managed to get 1.5 cu. feet total for .75 on two sealed sub drivers. Running the Dayton Quatro drivers which have a recommended .35 cu. ft. sealed box. Carpeted the thing and then ordered a seat cushion from CC. <BR> <BR>Check out the pics. <BR> <BR>Chris <BR>No Slip Gator Grip <BR><a href="http://www.wakejunky.com" target="_blank">www.wakejunky.com</a> <BR> <BR> <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78535.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78536.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78537.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78538.jpg" alt="">
|
Sweet Job!
|
nice work and very clean looking! I'm sure the person in that seat will be in for one hell of ride... <img src="http://www.wakeworld.com/MB/Discus/clipart/lol.gif" border=0>
|
Give the person in that seat some rumble in the bumble
|
did you port the cup holders?<img src="http://www.wakeworld.com/MB/Discus/clipart/proud.gif" border=0> <BR> <BR>great work...
|
That Look's real good. What do you think it cost you to do the whole thing excluding the drivers, <BR>What carpet did you use it looks like it matches perfect. It also looks like you used fiber glass resin to cover the MDF?
|
Mine's at West Coast now. You can start it next<img src="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" border=0>, Nice job.
|
Hey Guys, <BR> <BR>Grant: I used a single sheet of 3/4" MDF, about 16oz of Resin, 4 cup holders and scrap carpet from the shop, cushion from CC. Mind you I work for CC so, I got the cushion at cost so, I'm into it for about $170. <BR> <BR>Cup holders are completely separate from the sub boxes. I put a separate chamber just for the cup holders so, they are not part of the 1.5 cu. foot sub chamber. <BR> <BR>Chris <BR>No Slip Gator Grip <BR><a href="http://www.wakejunky.com" target="_blank">www.wakejunky.com</a>
|
Chris, <BR> <BR>Nice installation, looks great. Your occupation says engineer and you said you work for CC. Are you an} engineer for CC?
|
Chris, How does your SAN pull with the Lance? Which model of camper is that, a 920? We're still in a short bed 825 and like it although it is small with four.
|
Long story short but, I'm actually an out of work Test Engineer who is working at West Coast Correct Craft. <BR>I have a Lance 2000 Lance 1120 a bit big for the SRW setup but, I've made enough mods to the truck's suspension and drivetrain to not worry about it too much. <BR> <BR>Chris <BR>No Slip Gator Grip <BR><a href="http://www.wakejunky.com" target="_blank">www.wakejunky.com</a>
|
Great work, but how does it sound? What are you pushing them with?
|
Do you have new picture of your boat?
|
All times are GMT -7. The time now is 1:53 PM. |