If someone with a newer Wakesetter VLX with a Skylon Tower could measure the inside dimension (ID)of the tower at the top this would be much appreciated and would help me get started faster and start posting pictures. Also I need the spacing on the 4 bars that go across the tower up top. Thanks to anyone that can help me out. Clay-DOGGY <BR> <BR>
|
I will try and check mine tomorrow AM.
|
Thank's Buzz'
|
Sorry I took so long to get back. Here's what I got. <BR> <BR>The front section of the tower is roughly 62" wide. The rear is 68" wide. That is a couple inches down from the curve at the top. Inside diameter, BTW. The distance between the front and back cross pieces is 7 3/4", and between the two connecting pieces (with the thumbscrews) is 21 1/2". <BR> <BR>Hope this makes sense. Pics should show what I measured. Let me know of you wanted something more specific. <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/216064.jpg" alt="tower"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/216065.jpg" alt="tower">
|
THANKS BUZZ FOR THE INFO, THIS HELPS OUT ALOT!!! <BR>
|
Yes, Thanks BUZZ. We will post some photos of the project, <BR> <BR>BTW how do you like the Nutrix Connector's, Waht speakers are you using?
|
Only had them for a week. So far they are great. They came with my Defcon 4's.
|
All times are GMT -7. The time now is 12:12 PM. |