WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   05 Sanger V210 ski locker panels (http://www.wakeworld.com/forum/showthread.php?t=801352)

sk4910 03-08-2014 12:25 PM

05 Sanger V210 ski locker panels
 
I have a 2005 sanger v210 and on either side of the engine, there are these plastic panels wrapped in carpet. Mine are very warped and coming apart. What can I use to make new panels that separate the engine compartment from the ski lockers. I have a 400lbs fat sac in each ski locker that pushes against these panels and is probably part of the reason they are so warped. Thanks!

sk4910 03-09-2014 9:33 AM

Any ideas?

vette74 03-09-2014 11:29 AM

Mine are made of wood wrapped in carpet and they are holding up fine since 98. I would get marine grade plywood and go to town

rallyart 03-09-2014 12:37 PM

I'd ask Sanger if they could make you two out of their 'Aqua' plywood. The other possibility would be to add a reinforcing brace to the back side of your existing panels to get them back into shape and keep them there. One or two 2" pieces on the length of the back side would do it.

ralph 03-09-2014 12:49 PM

Mine are ply in my 03 and they are perfect. I have custom tanks in the back tho so no bags pushing on them.

Dmac420sj 03-09-2014 9:08 PM

Ply wood marine resin. And use yours as a template if they aren't too warped


All times are GMT -7. The time now is 7:02 PM.