How many of you have underwater LEDs on your boats? And if you have them please post a pic. <BR> <BR>The audio dealer I am using has some cool pics.

I have them on my swim deck <BR>On a Tige Switch-V <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/455144.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/455145.jpg" alt="Upload">

Where can you get those LED's?

Nice pics are there more?

Did you drill threw the platform? Do you have a pic of the top of the platform? Any pics of boat in the water? Are those trailer LED's

IceCube LED . <BR>No I did not drill all the way through the swim Deck. ( ¼ screws only holding on by about 4 threads, also used silicone) <BR>Did a water test in my pool and works great. I have put about 10 hours of running time on them at my local lake with no problems. Have not had them out at night yet, as we are not allowed on the local lakes after dark. Taking it to Lake Mojave in 2 weeks . Will take picks and post. <BR>Total cost of mod is was $45. for everything

<a href="http://stores.ebay.com/TMI-LED-TECHNOLOGY_W0QQssPageNameZstrkQ3amefsQ3amesstQQtZk m" target="_blank">http://stores.ebay.com/TMI-LED-TECHNOLOGY_W0QQssPageNameZstrkQ3amefsQ3amesstQQtZk m</a> <BR>This is where i got them from

I've got em. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/456348.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/456349.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/456350.jpg" alt="Upload">

Where do you run the wire back into the boat? Drill a hole in the transom?

The rub rail goes real low on the back of the 211, I just ran the wire up under the rub rail and drilled a hole under it, ran the wire and siliconed it. The 2" of wire between the rub rail was run under my transom protection pad. The slight bump from the wire is hardly noticable.