Anyone know where I can find pulleys to upgrade a 351 Ford to dual pulleys of different widths or some configuration that will allow for a 3/8" belt on the impeller and a 1/2" or dual belts on the alternator? Is this even possible? Thanks.
|
Napa
|
<a href="http://www.marchpulleys.com" target="_blank">www.marchpulleys.com</a>
|
Grant had to have his machined. I do not think you will find the correct pulleys anywhere. I believe the cost for two custom machined billet pulleys was in the $800 range.
|
Mike is correct: Caesar is having the same pullys made right now. A good machine shop can take your factory pullys and re make them with the belt sizes you need thats what I had done <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/572426.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/572427.jpg" alt="Upload">
|
All times are GMT -7. The time now is 10:11 AM. |