Advice on Rail build
planning to pound in 4x4 posts into a mud bottom pond for the first rail in a winch park. from past experience i find that as you pound on the top of the post it starts to splinter making for a pain when it comes to assembling the sliding structure. i found this post driving cap http://dockmaker.com/Merchant2/merch...Category_Code= but didn't really want to drop the $40 and have to wait for it to be shipped here. any suggestions or advice with this project?
|
|
drive em down and cut the tops off. It's what we've done for all the rails we've built here at my lake.
|
Wrap the top where you're hitting the post with duct tape. This will help it from splitting then cut them down to the height you want.
|
All times are GMT -7. The time now is 8:14 PM. |