How do I remove the factory Eye at the top of the pylon? thx

Dremel tool. AFAIK that is the only way to get it off. The down side is that it is permanent :-( <BR> <BR>Trash

Well, I took the pylon off of my 83 2001. <BR>I've heard that either it comes off easy or it doesn't come off at all. <BR>Here's how I did it. <BR> <BR>1. Spray liquid wrench around the ring. (use a rag to catch the overspray). <BR>2. Wait a day. <BR>3. Repeat step one. <BR>4. Wait another day. <BR>5. Drive both pins all of the way out. I used a 1/4" drift punch if I remember right. <BR>6. I took a 3 foot oak dowel that I had laying around and put it through the ring and gave it a good twist. I twisted it and lifted at the same time. Mine turned easy. If it doesnt move then you might have to cut it off. <BR> <BR>Mark