WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 21, 2003 (http://www.wakeworld.com/forum/forumdisplay.php?f=68703)
-   -   Break-In Period (http://www.wakeworld.com/forum/showthread.php?t=62343)

wakerider 04-09-2003 10:25 PM

My buddy is getting a brand new X-2 next week an we were wondering what the break-in period would be on a new boat? How long did you guys wait before you put your boats to use?

bbeach 04-10-2003 7:16 AM

10 hours varying the rpm's. This is a must, it allows the pistons seals to seat properly. Then DEFINATELY CHANGE THE OIL. Then you should be okay to do whatever.

fbroen 04-10-2003 7:57 AM

There are pretty good instructions in the manual on how to best do it, what rpms to not exceed etc. Or also, on Indmar's site you can download their manual <a href="http://www.indmar.com" target="_blank">http://www.indmar.com</a> <BR> <BR>The one thing I have heard conflicting things on is whether you need to also change the tranny fluid after break-in. What's the deal with that?

wakerider 04-10-2003 10:10 AM

Thanks guys. This helps quite a bit. It will be a pain in the @$$ to just put around the lake for 10 hrs, but I can't wait to get it over with!!!

r_brown 04-10-2003 10:22 AM

Wakerider, <BR> <BR>dont go putting around at idle because your oil level is low when your at idle ,good luck <BR> <BR>Ryan B <BR>

tlb 04-10-2003 4:09 PM

I think Indmar recomends tranny oil change at 25hrs. On direct drive boats they also want the prop shaft alignment check at this time. I don't know about v-drives, I don't own one, Yet.

All times are GMT -7. The time now is 4:06 AM.