Here are some pics of our PRO 80X on the new Centurion tower. Let me know what ya'll think. <BR> <BR>Thanks, <BR> <BR>Tim White-President <BR>Wet Sounds, Inc. <BR> <BR> <BR> <BR> <BR> <BR> <BR> <BR> <BR> <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/357942.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/357943.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/357944.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/357945.jpg" alt="Upload">

I like the cans on the poster in the background on the last pic! <img src="http://www.wakeworld.com/MB/Discus/clipart/biggrin.gif" border=0> <BR> <BR>Nice looking speakers too!

How do they mount to the Tower you did away with your orignal mounts?

I think the finish on your speakers is much better than the finish on the Centurion tower.

Grant, <BR> <BR>We have added a new model that is the PRO 80X. Which is for the Illusion tower. And we have the similar version of the PRO 80X for this tower as well. <BR> <BR>They are just like our PRO 80X Illusion version. So they mount like an Illusion speaker. (metcraft makes the tower on this one and the Illusion) The mounting holes and speaker wire are a little different but same concept. <BR> <BR>You take the front baffle off that holds the driver and bolt the housing up and wire up inside the speaker. Then bolt the baffle with the driver back on. <BR> <BR>So there is no clamp of speaker wire visible etc... <BR> <BR>We still have the regular PRO 80 with the clamps for regular tube towers. <BR> <BR>Tim