WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Wakeworld Ghost Ballast setup? (http://www.wakeworld.com/forum/showthread.php?t=782572)

adambarry 08-10-2010 11:39 AM

Wakeworld Ghost Ballast setup?
 
Everytime I see pictures of that thing I sit and wonder how it has so many drain holes on the side of the boat.. I am thinking he added a few bags like in the back and maybe an integrated sac but that still leaves two extra holes. 2 bilge pumps? or did he fit another one in there somewhere? Just out of curiosity..

migs 08-10-2010 1:18 PM

4 ballast tanks = 4 holes + bilge

polarbill 08-10-2010 1:37 PM

I got to ride in Brent Starr's boat and watch Bret V and Brent take a set. I am guessing Dave had a similar setup to his. He had and 08 VLX with the hammerhead and all 4 tanks. If I remember right he had all 4 stock tanks filled, 350 in each vdrive locker, a 500 across the cockpit floor, a triangle bow sack filled to probably 500-700 pounds plus a 1000-1500 pounds in lead disbursed. That would put it at 4000-5000 pounds. They road this with no wedge. It was pretty crazy. When slowing down you had to watch for water over the bow and the stern. It was slumped for sure.

ilikebeaverandboats 08-10-2010 1:42 PM

Quote:

Originally Posted by polarbill (Post 1620233)
I got to ride in Brent Starr's boat and watch Bret V and Brent take a set. I am guessing Dave had a similar setup to his. He had and 08 VLX with the hammerhead and all 4 tanks. If I remember right he had all 4 stock tanks filled, 350 in each vdrive locker, a 500 across the cockpit floor, a triangle bow sack filled to probably 500-700 pounds plus a 1000-1500 pounds in lead disbursed. That would put it at 4000-5000 pounds. They road this with no wedge. It was pretty crazy. When slowing down you had to watch for water over the bow and the stern. It was slumped for sure.

holy sacked batman

adambarry 08-10-2010 2:10 PM

lol it has 9 holes throughout the boat though. 4 tanks and then 4 bags and 1 bilge? lol thats my guess..

liljohn 08-10-2010 2:35 PM

4 tanks = 8 holes 1 for the drain and 1 for the vent. the old ghost ran 5500# i belive.. I have pictures of it some where.

wakeworld 08-10-2010 3:04 PM

2 Attachment(s)
Slumpy McSlammed...

All nine of those holes are stock. Not sure which does what, but I didn't add any. All extra sacks are filled and emptied manually.

2008 Malibu Wakesetter VLX w/ 5000 lbs. of ballast
Attachment 6911

2010 Malibu Wakesetter VLX w/ 3000 lbs. of ballast
Attachment 6912

adambarry 08-10-2010 3:15 PM

oh thats odd. Lot of drain holes lol. That thing is looooooowwwwwwww. Must be scary everytime you stop. and I must say Dave.. that is the best looking malibu I have ever seen. So sexy!

ilikebeaverandboats 08-13-2010 12:22 PM

Would be nice to have the extra holes to add another bilge or something, and i like them grouped like that. rather than random holes along the side of the hull.
David is that 2011 your new boat??

jeff_mn 08-13-2010 12:36 PM

those two boats are te nicest looking boats I've ever seen.. I love your style Dave..

A dude we ride with has over 4k in his new Xstar and we will take water over the front and back if you don't decel slow..

Jeff 08-13-2010 12:43 PM

I might start a trend with simulated thru hulls. Like those simulated engine vent ports that wanna be gangstas put on their car fenders.
http://www.jcwhitney.com/simulated-e...=c2130d16949j1

I'd get like 30 fake thru hulls and stick them down the side of my boat. The ladies would be like "Ooooh! I bet he gots a crazy big ballast system on there!"

liveoz 08-13-2010 4:49 PM

Two drains and two vents in the front, a drain and vent, + bilge on back rt, a drain and vent on the back left.

08-13-2010 5:10 PM

thats cuz malibu is not smart enough to use reversible pumps.. so instead the drill a million holes all over the boat :)

wakeworld 08-14-2010 8:43 AM

Joey, that's a 2010. We normally re-up every two years so 2012 would be our next one, but I have to tell you that I just fall in love with these boats and it's really hard to give them up once you get them all dialed in! I guess that's a pretty nice problem to have, so I'll shut up now.

ilikebeaverandboats 08-14-2010 11:05 AM

Quote:

Originally Posted by wakeworld (Post 1622206)
Joey, that's a 2010. We normally re-up every two years so 2012 would be our next one, but I have to tell you that I just fall in love with these boats and it's really hard to give them up once you get them all dialed in! I guess that's a pretty nice problem to have, so I'll shut up now.

looks pretty trick. I forgot the 2010 had the new tower. Best lookin BU ive seen....well since the 2008 you had haha!

wakeworld 08-14-2010 11:07 AM

Yeah, I'm bummed that you can now get the white tower on the 2011 and I'm stuck with black. The white tower would really be the finishing touch!

ilikebeaverandboats 08-14-2010 12:13 PM

Quote:

Originally Posted by wakeworld (Post 1622247)
Yeah, I'm bummed that you can now get the white tower on the 2011 and I'm stuck with black. The white tower would really be the finishing touch!

yea i was wondering why you didnt follow up with a white tower like with the 08. But dude it not that big a deal haha, boat still looks killer. Could you get the black powdercoated? I have no clue what kinda finish/material the tower is but it might work.

wakeworld 08-14-2010 2:56 PM

I don't think it's powercoat. It's a pretty unique roughed up surface, so I don't know how they do it.

kyle_m 08-14-2010 3:04 PM

dave i think it would look sick i you could get the chrome on the tower powder coated white that could be a sick accent i mean i havent seen it but it s just a thought in my head that would look awesome

TimboSlice 08-14-2010 4:13 PM

david,
can you post pictures of the wake when yall were shooting for global warning?

ilikebeaverandboats 08-14-2010 4:43 PM

Quote:

Originally Posted by wakeworld (Post 1622280)
I don't think it's powercoat. It's a pretty unique roughed up surface, so I don't know how they do it.

yea i dont think it would be worth all the trouble to get it smoothed out and powerdered. Ive never seen one of those up close, the black still looks sick, and its not like it doesnt go with the rest of the boat ya know? still solid.

wakeworld 08-15-2010 3:10 PM

Quote:

Originally Posted by TimboSlice (Post 1622284)
david,
can you post pictures of the wake when yall were shooting for global warning?

Gotta buy the DVD!! :D


All times are GMT -7. The time now is 8:15 AM.