WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   2013 Ronix Bill hardware (http://www.wakeworld.com/forum/showthread.php?t=803074)

gregs_place 08-18-2014 12:20 PM
2013 Ronix Bill hardware
 
Just recently purchased a 2013 Ronix bill board and the screws for my bindings would not fit in the holes on the board. What size screws do you need?

ATB0713 08-18-2014 1:01 PM
Quote:
Originally Posted by gregs_place (Post 1889340)
Just recently purchased a 2013 Ronix bill board and the screws for my bindings would not fit in the holes on the board. What size screws do you need?
I'm pretty sure its M6, metric screws.

LHMWakeshop 08-18-2014 1:43 PM
m6 hardware, all boards after 2012 use m6 hardware

gregs_place 08-18-2014 2:42 PM
Can I go to any local boardshop and get m6 hardware there?

baitkiller 08-18-2014 2:51 PM
Quote:
Originally Posted by gregs_place (Post 1889366)
Can I go to any local boardshop and get m6 hardware there?

Any decent hardware store will have them. Make sure you get stainless steel.

LHMWakeshop 08-18-2014 2:52 PM
Quote:
Originally Posted by gregs_place (Post 1889366)
Can I go to any local boardshop and get m6 hardware there?
absolutely! If not contact me through here or my email info@lhmwakeshop.com and ill hook you up!

rplogue7 08-21-2014 7:15 AM
yeah, you need m6 screws if you don't have them. I have 2 extra sets if you want one for a bargain just PM me


All times are GMT -7. The time now is 7:30 PM.