Hey, I chipped the tip of my board and was wondering what to use for gluing it back together. Its an 05 Balance and i just delaminated it where the top and bottom meet at the tip. the old ollie up onto the dock trick. i was thinking sort of a marine epoxy or something. its not really chipped as much as its delamed.

you can get epoxy at west marine in single serving pouches. that will work just fine.

whats west marine

<a href="http://www.wakeworld.com/articles/2004/fixadent.asp" target="_blank">http://www.wakeworld.com/articles/2004/fixadent.asp</a>

awesome. i think that was sort of what i had in mind but that article helps a lot. thanks for that.

I filled mine with fiberglass resin and sanded it down ot match the rest of te board.

I had a small chip in my board as well, so I used epoxy. After a full day and night, I used a file and sand paper to smoothen it down. Seems to be working all the same still.

i'm so anal about my equipment, i think i would burst a blood vessle (sp?) if i ever chipped my board