Does anybody know how the tray which holds the cupholders comes out of the side panel on the V210. i am putting in some S/S cupholders and I thought I might get these trays wrapped in vinal at the same time. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/390921.jpg" alt="Upload">
|
I got it sorted, if you undo the two screws on the tabs of the side panel, the whole panel lifts up and out, the tray is held into the panel with 4 screws. I'll post some pics of the modified panel next week.
|
Darren:No LEDs in your cup holders???? <BR> <BR>(Message edited by grant_west on November 22, 2006)
|
Of course there will be LED's. Silly rabbit.
|
Oh I feel an addition forming. LED's RULE. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/392856.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/392857.jpg" alt="Upload">
|
Nice touch. Did the cop holders come set for LED's or did you add them.
|
No I added them. I'll do a new post next week when I have the rest of the boat completed.
|
please do! Did you do the vinyl on the cup holders yourself?
|
Yes, it came out really well, looks much more plush than the black fibreglass that was there before. I was tempted to do the whole enclosure but it couldn't be done without some sewing machine work which was beyond me. <BR> <BR>(Message edited by ralph on November 30, 2006) <BR> <BR>(Message edited by ralph on November 30, 2006)
|
Looks good Darren. Off subject, did you say you run the Acme 525? If so, how much of a difference did you feel over stock? How much top end did you loose? Im reproping soon.
|
Yes acme 525. I cannot compare it to the stock prop as I got my boat from the factory with it on there. Top speed is 44mph with 550 pounds of lead but ballast empty.
|
Looks cool Darren. I like the blue.
|
All times are GMT -7. The time now is 4:37 AM. |