i just finished breaking in my new X2 and i was wondering how to get the the best wake possible out of it. weight placement? how much weight?

<a href="http://www.wakeside.com/page/w/PROD/wakeboard_boat_ballast/fly07_x_2_558032" target="_blank">http://www.wakeside.com/page/w/PROD/wakeboard_boat_ballast/fly07_x_2_558032</a> <BR> <BR>end of story!

the fly high system is a great start but you still will probably need to add some weight to get the best ratio of front and rear weight placement along with getting a slightly bigger wake

2x550 back <BR>2x440 nose <BR>w/factory ballast

are there any bags that will fit under the bow seats besides lead?????

the integrated bow sac fits under the bow seats but is limted to how much it fills by the space restriction so you wont get the full weight it says it will add

Not true at all, It will fill to its maximum size and weight as advertised.

By the way the Fly High system is amazing. Its all you will ever need.

is the fly high integrated bow sack the same as the "custom x2 bow sack" that comes in the x2 complete ballast system????

Yes blake-and I know where you are going with this. The kit is 1250. The side bags a re 189 each and the bow sac is what like 250. So its 600 bucks for some hose and fittings that should cost about 50 bucks total. Yup I dont get it either. I ordered mine individually

matt, do you have the bow sack???? if so how good does it fit? i checked the measurements and it sounds like the bow sack is going to be really cramped. also how is the wake with this set up????