Ok, Im putting a 10w7 into an under the seat compartment on an 08x2 and need help with determining what the best material is to use to be able to get it to seal up with the surrounding fiberglass floor and walls. IM thinking on using MDF and resining it then putting a layer of fiberglass but am curious on what your stereo pro's think... <BR> <BR>I'm also planning on using plexiglass on the top so that when the seat is removed one would be able to see the sub. What is the best way to get the plexiglass to mount to the oval fiberglass, and to the MDF should I go that route. BTW: the oval fiberglass cut out for the seat is beveled (angled inwards) so im going to have the piece beveled so that it will sit flush Any and all advice would be appreciated.