WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through August 21, 2008 (http://www.wakeworld.com/forum/forumdisplay.php?f=619129)
-   -   New 09 Board sighting! (http://www.wakeworld.com/forum/showthread.php?t=605695)

jjakober 07-25-2008 8:49 AM

Looks like DW is getting a new ride for 09! <BR> <BR><a href="http://www.alliancewake.com/video_details.php?id=3956&amp;page=1" target="_blank">http://www.alliancewake.com/video_details.php?id=3956&amp;page=1</a>

johnsvt 07-25-2008 10:02 AM

Nice

joshugan 07-25-2008 11:02 AM

Wow!! Amazing riding. J, do you know if this will be based on the Natural or will it be a different shape? Any ideas on fin pattern?

srh00z 07-25-2008 2:52 PM

I have always liked Watkins' riding, but I enjoyed that section more than I usually do. I tried to pause a few times to see the board, but I couldn't tell much. Looks like a new tip/tail and I didn't see as many molded fins unless I missed them.

ironj32 07-25-2008 4:05 PM

a fly on the wall told me that they actually are redoing that board from the ground up. the original "insert board name" (sorry guys, my lips are sealed) was too much like the natty i believe...they wanted to make it really out perform the natural. i wonder if the one he's riding is the finished product or if it is still in design?

andrew_moreton 07-25-2008 5:14 PM

Yeah and that X-Star wake looks clean

da_kamp 07-25-2008 6:44 PM

Dope video, likin the design on the top of the board, not so much the bottom, definitly saw two flutes per side on the top though so that'll most likely give some big pop. Really Hard to see if there is any molded fins though with that color

lsukuntryboy 07-25-2008 7:30 PM

dies it say "decade" on the bottom of the board? or do i need to go put my contacts in?

wakerider111 07-25-2008 7:38 PM

This is the best snap shot i could get of the board's bottom... i think... i'll watch and pause again here and there and see if i can get better <BR> <BR>looks like there is some Delta pattern there? <BR>and it looks like there is two molded fins on each end? instead of the 4 like on the player and natty <BR> <BR>what does it say on the bottom though? looks like some "D"s and some "C"s and some "E"s and a "V" maybe ?.... OHHHHhhh WAIT. It is not a "V" it is an "A" <BR>"DECADE" <BR> <BR>and then the smaller word beneath... "watkins" maybe? <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/605857.jpg" alt="Upload">

wakebrdr38 07-25-2008 7:42 PM

4 molded fins and it says decade. also looks to have the chevrons. dont ask me how i know, i got really lucky and paused it at just the right time and it wasnt as blurry. i paused it on the pete rose in the first quarter of the film

wakebrdr38 07-25-2008 7:43 PM

ahh you beat me to it. looks like the natural to me

wakerider111 07-25-2008 7:47 PM

and the top<img src="http://www.wakeworld.com/MB/Discus/messages/65919/605861.jpg" alt="Upload">

lives2wake 07-25-2008 8:02 PM

Awesome riding. I haven't seen any of his video sections. This was good. I like the big nose grab roll to blind.

aussie_stu 07-25-2008 9:40 PM

just saw that board in the flesh yesty out here, 2 moulded fins, chevrons between the fins, very tidy lookin deck, the proto's of his boots look schmick too <BR> <BR>(Message edited by aussie_stu on July 25, 2008)

adam_balon 07-26-2008 11:31 AM

kinda looks like a watson mixed with a witness.

pyrosmurf 07-26-2008 1:41 PM

The actual finished board won't have those molded fins, that was one of the design changes.

wakerider111 07-26-2008 9:05 PM

no molded fins? <BR>wow, that is almost un heard of, maybe that means that there will be multi-bolted-on (2 on each end) fins instead?

kristian 07-26-2008 9:33 PM

"won't have those molded fins" <BR>Josh didn't say "it won't have any molded fins"

jjakober 07-28-2008 2:00 PM

Josh, <BR> <BR>DW always bases his stuff off of his previous rides and then tries to build on it and make it even better! <BR> <BR>Option-->Player-->Natural-->?? <BR> <BR>He has been doing this for ten years and every new board of his gets better and better, I'm looking forward to checking it out when he gets it all dialed in!


All times are GMT -7. The time now is 5:13 AM.