WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Sema 2013 (http://www.wakeworld.com/forum/showthread.php?t=800324)

tn_rider 10-27-2013 4:36 AM

Sema 2013
 
Not sure if this is in the right discussion area but there are amazing tow vehicles there. Lets see pics of all the cool rigs there!

jonyb 10-29-2013 11:01 PM

I'm heading out Saturday to SEMA. I'll have a pic thread somewhere.

buffalow 10-30-2013 8:48 AM

I'll be there as well and grab some photos.

wetsounds1 10-30-2013 10:10 AM

Make sure to sop by and see Wet Sounds- Booth 61763. we have an outside booth on the south side of the Ford Drift track. we will have the Wet Sounds Rat Rod with the Wet Sounds Rat Rod Tige Z3 and three Polaris Ranger 6x6's. I'll post pics as well.

Tim
Wet Sounds

wetsounds1 11-11-2013 9:22 AM

10 Attachment(s)
Here is some pics of our booth at SEMA. Thanks to everyone who came by. I will post more later. Lots of awesome pics for sure. Show was amazing. It's pretty cool when you have an outside booth near the ford race track and your still TOO LOUD for SEMA. We had to cut the demo's short LOL

Tim
Wet Sounds

wetsounds1 11-11-2013 9:31 AM

6 Attachment(s)
more pics. You can check out more on our facebook page and our instagram page

Tim
Wet Sounds

wetsounds1 11-11-2013 9:39 AM

13 Attachment(s)
more

jonyb 11-11-2013 10:00 AM

Here's all of my pics from Saturday night to Saturday morning. I didn't go back through them, so everything on my camera went on photobucket.

Tim, lots of good pics on my link of the display and lighting at night. I'm gonna email most of them to Kent later today.

http://s32.photobucket.com/user/jony...?sort=3&page=1

wetsounds1 11-11-2013 10:03 AM

Thanks Again for all the help John! Truly appreciate it.

Tim
Wet Sounds

bryce2320 11-11-2013 10:11 AM

That is awesome! Wish I was closer to come listen to that boat! The rat rod look came together with the rat rod pulling it. I was skeptical, but you guys really pulled it off!

jonyb 11-11-2013 10:43 AM

Rat rod left most people speechless. The detail was amazing.

And the boat..... it was like fishing. A big herd of people would walk by in front of the convention center, Tim would turn the stereo up, and everyone within 100 yards would change direction and walk to the back of the boat. We were skeptical about where the booth was located and not having much traffic, but I think it worked out pretty well.

Tim, anytime! Nice to meet all the guys to put a face to a name after all these years.

tn_rider 11-11-2013 1:31 PM

Tim, will you have the boat in or around Tennessee?? I want to demo it so bad I can't stand it. I'm also in Ohio 8 days at a time if your around here too.

buffalow 11-11-2013 3:40 PM

5 Attachment(s)
I'll throw up some of my highlight in my visit. I sure need more than two days there. I was walking around drooling on everything and probably missed 20-30% of the show because there is just too much

buffalow 11-11-2013 3:47 PM

5 Attachment(s)
More

buffalow 11-11-2013 3:51 PM

5 Attachment(s)
More photos

buffalow 11-11-2013 3:55 PM

5 Attachment(s)
More photos...

buffalow 11-11-2013 3:56 PM

5 Attachment(s)
And more

buffalow 11-11-2013 3:58 PM

4 Attachment(s)
And Even more - Wish i had one of my good camera instead of phone, but you get the idea.

buffalow 11-11-2013 4:01 PM

5 Attachment(s)
Few more to go

buffalow 11-11-2013 4:03 PM

.

buffalow 11-11-2013 4:06 PM

5 Attachment(s)
More...

buffalow 11-11-2013 4:09 PM

5 Attachment(s)
Even more...

buffalow 11-11-2013 4:11 PM

5 Attachment(s)
Last batch

grant_west 11-11-2013 5:41 PM

Great Pic's thanks for taking the time to share

jonyb 11-11-2013 5:43 PM

The black bodydropped dually above drove 2000 miles from South Tennessee, pulling an enclosed trailer with "The Stranger", a custom build Ranger inside it. Then it was spitshined and sparkled for everybody at the show to look at. That's pretty impressive in my book. Truck looked flawless.

jonyb 11-11-2013 5:49 PM

http://i32.photobucket.com/albums/d1...ps4315861d.jpg
http://i32.photobucket.com/albums/d1...psb7d812d7.jpg
http://i32.photobucket.com/albums/d1...ps9039b663.jpg
http://i32.photobucket.com/albums/d1...psafc12ce1.jpg
http://i32.photobucket.com/albums/d1...psc171a569.jpg

bcrider 11-12-2013 9:03 AM

I want to put a set of those detroit steel wheels like on the rod and Tim's Tige trailer on my flex. Just waiting for them to make them in a 22.

gravity 11-13-2013 11:36 AM

nice pics. that old car is cool but I have to question the stopping when pulling that boat.unless they did some brake upgrade.

wetsounds1 11-13-2013 12:19 PM

1 Attachment(s)
We will have some video of the rat pulling the boat. You nailed it on the brakes! Rat has 4 wheel disc but manual with no booster. And had issues with trailer locking up on way to Vegas. So did not chance pulling boat through the cruise. Last thing we need is rear ending a Bugatti. I finished the car wed before the show. Actually re built the brakes wed morning. It all left for SEMA thur morn. Typical SEMA!

Tim
Wet Sounds

Here is a shot of one of the two bikes we had. My friend Rafik with RK Concepts builds some crazy stuff.

jonyb 11-13-2013 2:39 PM

www.rkconcepts.com

Rafik is a really cool guy. Builds crazy bikes that he WONT sell.

tyler97217 11-14-2013 8:56 AM

That bike is pretty badass

83Starsnstripes 11-14-2013 11:49 AM

^^can you actually ride that bike? Or is it just for show?

wetsounds1 11-14-2013 12:19 PM

Yes you can ride it. Just very carefully. Seat was not made for comfort. Check out his site
On the chain bike. Gas tank is a copper fire extinguisher you wear on your back! There is you tube videos of him riding it.

Tim
Wet Sounds

jonyb 11-14-2013 1:54 PM

I'll dig around tonight on photobucket, I think I've got some pics from SEMA last year with a few more of Rafik's bikes. Their in the album "SEMA 2012" on my PB.

gravity 11-14-2013 3:45 PM

Hey Tim. you killed it on the boat and the car. I usually cant stand those rat rods but yours is really well done and thought out. lots of cool stuff going on. nice to see one that was done safe and has tons of one off metal work. nice job.


All times are GMT -7. The time now is 7:19 AM.