Fat Sacs Plugs Glued In
 

Any one have any recommendations on how to get glued plug n play plugs out of fly high ballasts? I tried heating them up with a hair dryer but those suckers arent moving!

I had to heat mine up with a hairdryer for a long time then use channel locks to twist them off. I stood on the bag to hold it too.

Used a hairdryer for a 30 minutes and still was struggling. Moved to heat gun. Removed 4 fittings in 10 min. Skip the hair drying move to heat gun. Cheap Wagner one at Lowe’s is what I used. Much easier.

I followed what that video showed after leaving a hair dryer on it for 10 minutes and they popped right out. That said I had used hair dryer for 10 minutes and a channel lock before and it didnt move at all. You could see it roughed up the bag a little bit but thread right back in without issues.

heat gun from harbor freight