WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through February 21, 2008 (http://www.wakeworld.com/forum/forumdisplay.php?f=550830)
-   -   Riser gaskets? 351/89' (http://www.wakeworld.com/forum/showthread.php?t=540813)

andrewjet 02-02-2008 6:48 AM

Anyone heard of the heat riser gaskets wearing out and dumping water into the eng? I thought I have heard this before..IS THIS A SOMETHING I NEED TO WORRY ABOUT? Or replace now? Jet

882001 02-02-2008 7:10 AM

if they are leaking on the outside then they are leaking on the inside. look for rust streaks running down

jayc 02-02-2008 7:30 AM

Normally its the riser/manifold it self corroding at the gasket point and allowing water into the engine. <BR> <BR>If your unsure of the condition pull them off and inspect.

sanddragon2004 02-02-2008 8:50 AM

replace the gaskets,


All times are GMT -7. The time now is 3:41 PM.