Tower speaker quit working
 

I have 4 Wetsounds Pro 60 tower speakers. 3 of the 4 work just fine and sound great but all of the sudden I'm getting no sound out of the 4th. All of my other speakers in the boat, sub, amps, work fine. There is no sound at all coming from the 4th tower speaker. Maybe a connection issue? if so how do I check it?

steve,

give our tech support a call at 877-938-7757 and ask for Gyver

Tim
Wet Sounds

Thank you very much Tim, I really appreciate that. I will call him. Changing subjects a little, do you think the Revolutions are worth the upgrade from what I have?

No prob, gyver can walk you through over the phone or get an RA to send it in to see whats going on with it.

The REV 8 is going to give you 8 inch mid bass drivers in the same size housing you have. Plus the new Rev Tech technolgy we have put in them. So 4 REV 8's will be a LOT more volume if you decide to upgrade

Tim
Wet Sounds

Swap a known good speaker over to the one that isnt working. At least you will be able to isolate either the speaker or the feed/wiring is the problem.

Unscrew the blue part of the connector and see if by chance one the of the wires has worked loose. If the leads will reach, swap that speakers lead with the one next to it and see is the problem stays or moves.