A little advice: Never start a boat project during the summer...you will never get it done...i will hang it tomorrow &amp; post some pics... <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252141.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252142.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252143.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252144.jpg" alt=""> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252145.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252146.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252147.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252148.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252149.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252150.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252151.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/252152.jpg" alt="">

looks sick, good job

Dang jimmy, they are some big horns. I bet that thing cranks

awesme job. i wish was able to do that kind of work. it just looks so much nicer with a big custom enclosure like that. <BR> <BR>let us know how loud it is. you have some serious horns there bud.

Looks like it's gonna smoke!

What! Nice Job! <BR> <BR>How did you paint it, 2-stage, single stage, or rattle can? The paint job is impressive. <BR> <BR>

i am using the same drivers that are in NVS entity 808's...but i chose a different horn for aesthetic reasons...not sure how it will affect sound... the 8's should (in theory) focus sound towards the middle of the wake, so hopefully the horns will help redirect some of that to the flats... <BR> <BR>yup, a rattle can and a lot of polish... just kidding, two stage pearl w/ 4 coats of clear... cut &amp; bufffed... <BR> <BR>(Message edited by tdc_worm on September 02, 2005)

what are you powering it with? looks great. how much does it weigh with speakers and clamps?

tdc_worm, <BR> <BR>I was think about build a speaker box on the off-season. Once you have the frame ready to go, did you just lay the fiberglass sheet over the mold and then coat it with resin? How do you support the sheet so that its uniform shape? Any tips would be great. I am waiting to see that thing mounted on your boat. It should look sick. <BR> <BR>thanks, <BR> <BR>jeff

Damn dude you are really good at that. I am jelous, Ive never been good with my hands (except with the chicks)