Here is a link to both regular and goofy riders hitting 3s. <BR> <BR><a href="http://www.wakepics.com/view_single.php?medid=16129" target="_blank">http://www.wakepics.com/view_single.php?medid=16129</a>
|
Damnit, I'm on vacation and only have dial up until I return home..Don't have the patience to DL it!! <BR> <BR>I'm really really close to pulling it off. I can get all the way around but I always lose the wave. I found if I crouch and put my trailing hand in the water it helps. Anybody else pulling 3's?
|
3's are nothing. I am at the point now where i spin the first 180, stall, ride switch and then bring it all the way around or just spin the whole thing. <BR>I charge forward from the back of the wake, reach both hands behind me and push my self around. stay low and remeber to put front foot pressure to stay in the wake. Remember, when you spin you are loosing speed and falling back, that is why i charge close to the boat so i have the distance to catch the back part of the wake with power. <BR>I have spun 5's and 7's but fall off the back and loose the power of the wake, i think they are possible depending on board and wake size.
|
Adam Roten does 5's and 7's on the Surf Skate. He has completed 9's but not yet surfed it out. Check him out at: <BR><a href="http://209.242.151.8/boardz/SurfSkate_Prototype_256kbps.wmv" target="_blank">http://209.242.151.8/boardz/SurfSkate_Prototype_256kbps.wmv</a>
|
I did a "trick" yesterday, by accident, a euphamism for OUT OF CONTROL, I got hit by a roller, sideways, starting my 360 and spun it on the spine, then instead of coming back on the same side, I slid over to the OTHER side of the spine and continued the rotation, completing another 360 in the wash. So in short, a 720, 1 360 on each side of the wake. No matter how hard I tried I couldn't do it again. Any rippers out there able to do it?
|
I can't watch that video for some reason? It's saying it's a invailid file name and WMP won't play it.
|
I just viewed both video links in this discussion and they played fine. Do you have the latest WMP? I think they're up to vers. 10 now.
|
All times are GMT -7. The time now is 1:17 PM. |