WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Non-Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=4387)
-   -   jpeg to pdf (http://www.wakeworld.com/forum/showthread.php?t=800004)

jaegermaster 09-17-2013 5:10 PM

jpeg to pdf
 
I need to convert a jpeg (scanned drawing) to a pdf. For some reason when I open the jpeg I cant print it out. Does anyone know how to convert the file to a pdf so I can print it out? Or any other way around this?

Any help is appreciated.

Thanks.

SBC350 09-17-2013 6:16 PM

You can use any print to pdf tool.

Such as www.dopdf.com
It is free and I use to convert any documents/pictures to pdf. Once installed just use the print button to "print" to pdf.

Sent from my Nexus 4 using Tapatalk 2

sidekicknicholas 09-18-2013 5:34 AM

Quote:

You can use any print to pdf tool.
+1

Tons of freeware out there, just print as you would like you were sending the document to a physical printer, but after install whatever software "PRINT TO PDF" should be a option.


.... you probably could also:
Right click the image and "Open with" --> Paint. From MS Paint you should be able to print it as is.
Or dump and/all jpegs to a powerpoint slide, then save the presentation as a PDF... getting proper image size might be an issue

annq42 09-18-2013 7:12 AM

I would just use cutepdf. It shows up as a normal printer choice, so you can just 'Print' to PDF.

DenverRider 09-18-2013 8:58 AM

I use the free version of Primo PDF. Works like the others mentioned above.

Cap305 09-18-2013 9:18 AM

If you have Microsoft Word you can insert pic and file-save-as and select pdf. You will lose a bit of resolution.

pierce_bronkite 09-18-2013 1:47 PM

Are you just trying to print a .jpeg? If so, just open the .jpeg with any browser and go to File>Print.

jaegermaster 09-18-2013 5:41 PM

Thanks guys, the problem I was having was there was no print option when I opened the jpeg. I also didn't have the option of right clicking and opening. I downloaded dopdf and it worked great.

Thanks for the help.


All times are GMT -7. The time now is 9:08 AM.