|
|
| Account Type: | WakeWorld Members |
| Network: | Default |
| Profile Views: | 3420 profile views |
| Friends: | 0 friends | | Updated: | 7 month(s) ago | | Signup Date: | July 16, 2012 |
|
Posts:
|
971
|
|
Points:
|
|
|
|
About Me
|
Username:
|
boardman74
|
|
Last Name:
|
RB
|
|
Gender:
|
|
|
Birthday:
|
(38 years old) |
|
Occupation:
|
|
|
Employer:
|
|
|
City:
|
|
|
State:
|
|
|
Country:
|
|
|
Home Ride Spot:
|
|
My Gear
|
Board(s):
|
Hyperlite Machete 140
LF Trip 143
|
|
Bindings:
|
HL Agents
|
My Boat
|
Boat Year:
|
2013
|
|
Boat Make:
|
Tige
|
|
Boat Model:
|
RZR
|
|
Trailer:
|
Tige Boatmate
|
|
Engine:
|
PCM 303 Pro Sport
|
|
Ballast Setup:
|
Stock 900lb plus installing 2x500 lb rear
|
|
Stereo Setup:
|
Inprogress
|
Recent Activity
 |
15 minute(s) ago
boardman74 made a post in this thread: Malibu Vride vs. Moomba OutbackThe Vride is going to win that all day. Not just because Malibu is a higher end boat, but because the Vride is a bigger more wake specific boat. The Outback is Moomba's ski/family/cross over boat. I'm also guessing for 41K, that is the DD outba...
|
|
19 minute(s) ago
boardman74 made a post in this thread: how many pounds trailer jackYou shouldn't have anywhere near 1000 lbs of tongue weight to the 1000 is plenty. The tongue jack only needs to support the weight at the tongue of the trailer, not the total weight.
|
|
21 minute(s) ago
boardman74 made a post in this thread: First audio install need help guysThat 2/0 is pretty big cable for a side cutter or tin snips unless you have a big one. If you don't, I have always cut is with a nice sharp hack saw(fresh good blade). Clamp it in a vice and cuts really easy.
|
|
5 day(s) ago
boardman74 made a post in this thread: Should there be any play in a prop?You should be able to get the number off the prop and call OJ or what ever brand it is and they will know by your make and year if its the correct fit.
Pull the nut off and see if it comes right off. Like Jordan said if it does thats a huge pr...
|
|
5 day(s) ago
boardman74 made a post in this thread: Should there be any play in a prop?I would say there shouldn't be any play as the prop should have the key and then as it slides in it swedges onto the tapered shaft. Are you sure its tight? I know you just bought the boat, i'd look for a part number and verify that is a proper p...
|
|
|
|
