PERFECT PASS not aggresive anymore. why? Log Out | Topics | Search | Register | Edit Profile | User List
Last Day | Last Week | Tree View | Moderators | Help/Instructions
WakeWorld Discussion Board » >> Boats, Accessories & Tow Vehicles Archive » Archive through July 28, 2009 » PERFECT PASS not aggresive anymore. why? « Previous Next »
By andrew (tantrum999) on Monday, July 20, 2009 - 7:56 am:    Edit Post Delete Post
perfect pass on a 2001 wont hold speed. im a boarder and i am scrubbing 2 mph at least off the speed when i cut out when it used to be rock solid. its had a new paddle wheeel and the system is about 7 years old. any ideas? servo?
By andrew (tantrum999) on Monday, July 20, 2009 - 7:59 am:    Edit Post Delete Post
if i remember rightly its wakeboard pro. all the settings where defaulted but still the same after i put the settings up. i couoldnt pull anything off it before. the lake is too small to run in rev based mode so SPEED only
By Adam Curtis (acurtis_ttu) on Monday, July 20, 2009 - 8:34 am:    Edit Post Delete Post
return spring may be going bad, cheap replacement.
By Jarod Criag (wake26) on Monday, July 20, 2009 - 9:15 am:    Edit Post Delete Post
I've been having the same problem PP told me that they think it is the electronic part of the paddle wheel that went bad. it is one of the only things that I have not replaced on the PP system.
By andrew (tantrum999) on Monday, July 20, 2009 - 9:40 am:    Edit Post Delete Post
Great to get such a quick response! the return spring looked fine but yes i will check if tired. the paddle wheel was replaced 2 months or so ago so guess it wont be that as the sign on the dash says its reading. what about a Tired servo??? the boat has been uused very regular for 7 years wiht the system?
By greg (lav) on Monday, July 20, 2009 - 9:42 am:    Edit Post Delete Post
+ 1 for return spring
By Jarrod Corby (showmedonttellme) on Monday, July 20, 2009 - 10:01 am:    Edit Post Delete Post
You adding more weight these days? Its most likely the spring the fellas are talking about....but I know that when you add more weight or move from a lake to a river, you really have to adjust the nn and kvm settings to account for the extra uummpphh you need.
By andrew (tantrum999) on Monday, July 20, 2009 - 10:12 am:    Edit Post Delete Post
Hiya same weight for the past three years, same lake same values. on a small lake i cant chane the nn rate because it s a small lake and swings really bad. it was always fine though thats what i dont understand. when put in rev mode it keeps not bad speed but not acceptable for any decent boarder going upside down.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions Administration
Privacy Policy | Terms of Use
WakeSpace is owned by eWake, Inc.
Copyright © 1996 - 2010, All Rights Reserved.