anybody know about vhm trailers Log Out | Topics | Search | Register | Edit Profile | User List
Last Day | Last Week | Tree View | Moderators | Help/Instructions
WakeWorld Discussion Board » >> Boats, Accessories & Tow Vehicles Archive » Archive through February 10, 2003 » anybody know about vhm trailers « Previous Next »
By Chad Miranda (forwaken) on Monday, January 27, 2003 - 10:22 am:    Edit Post Delete Post
They come with the B52's, just curious

 
By Grant (mtbmudmachine) on Monday, January 27, 2003 - 11:05 am:    Edit Post Delete Post
I know about DHM trailers. Thats what my Nautique came with
 
By Chad Miranda (forwaken) on Monday, January 27, 2003 - 11:07 am:    Edit Post Delete Post
maybe that is it? I just got off the phone with MB Sports and I thought they said VHM maybe it was DHM. Any pros or cons to the Trailer
 
By Tyler Moore (yellowdog) on Monday, January 27, 2003 - 11:44 am:    Edit Post Delete Post
I have a DHM under my MB and really like the trailer. The only down side that I have found is that DHM welds the brake actuator to the tongue of the trailer. Last year I had to replace the master cylinder and it was a little difficult because I couldn't take the actuator off. However, it wasn't difficult enough to warrant not buy this trailer.
 
By Chad Miranda (forwaken) on Monday, January 27, 2003 - 11:48 am:    Edit Post Delete Post
what B52
 
By Sean M (magic) on Monday, January 27, 2003 - 11:51 am:    Edit Post Delete Post
I have a DHM and find both the trailer and DHM's service are poor.

Just my experiance, had an axle smoke at 600miles. Turned out that it was not packed with marine grease and the seals were leaking... I am now pretty good at inspecting and repacking trailer axles.

I also had a tire blow out/up at about 1 year

 
By Tom (tcaton) on Monday, January 27, 2003 - 12:10 pm:    Edit Post Delete Post
I have a DHM trailer under my B52 and have not a problem with it at all.
 
By Tyler Moore (yellowdog) on Monday, January 27, 2003 - 12:27 pm:    Edit Post Delete Post
When my master cylinder for the surge brakes went out DHM went out of their way to help me get it fixed. When two different brake shops told me it would cost around $500, DHM explained by phone how to do it myself and also sent the directions with the needed parts. I ended up fixing it myself in about an hour and the part cost around $65. By the way, the actuator is not even made by DHM.
 
By Grant (mtbmudmachine) on Monday, January 27, 2003 - 12:55 pm:    Edit Post Delete Post
DHM trailers, I give my DHM a 7 in a 1-10 chart I had some Small problems with my trailer and so did my friend. The lights we all wired wrong I don't know how other Manafacture's wire there lights but the way DHM did my trailer and my friend's it was a JOKE. All the conections were bound to break or fail down the road, That was a easy fix. The Carpet bunks seems to be wearing Very fast! I noticed that the inner most portion of the carpeted bunk is wearing faster than the outer section of the bunk I think the angle of the bunks is wrong and that's what is causing the un due wear. I need to replace the carpet this year it's 1 year old. That sucks. Im going to re adjust the angle of the carpeted bunk with washers/spacers so it doesn't wear on thet section and the bunk will sit flatter. There is a few other things but Foo-get-about-it!
 
By Sean M (magic) on Monday, January 27, 2003 - 2:54 pm:    Edit Post Delete Post
Sounds like the same guy that wired my trailed did Grant's too. There is some shoddy connections there. I have all ready redone some of it and will continue to replace it as needed.
 
Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions Administration
Privacy Policy | Terms of Use
WakeSpace is owned by eWake, Inc.
Copyright © 1996 - 2008, All Rights Reserved.
WakeSpace@WakeWorld.com